Replacing the media card reader board – Dell Inspiron 15 (N5010, Early 2010) User Manual
Page 12
Replacing the Media Card Reader Board
1.
Follow the instructions in
Before You Begin
.
2.
Align the Media Card Reader board with the latch on the computer base and place the Media Card Reader board in position.
3.
Route the Media Card Reader board cable into its routing guide.
4.
Connect the Media Card Reader board cable to the connector on the system board.
5.
Replace the palm rest (see
Replacing the Palm Rest
).
6.
Replace the keyboard (see
Replacing the Keyboard
).
7.
Replace the optical drive (see
Replacing the Optical Drive
).
8.
Replace memory module(s) (see
Replacing the Memory Module(s)
).
9.
Replace the base cover (see
Replacing the Base Cover
).
10.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.