Dell Studio XPS M1340 (Mid 2010) User Manual
Page 14
Advertising
3.
Tighten the two captive screws and replace the other two screws that secure the graphic processor heat sink to the system board.
4.
Connect the thermal fan cable to the system board connector.
5.
Replace the central processor heat sink (see
Replacing the Central Processor Heat Sink
6.
Replace the rear caps (see
Replacing the Rear Caps
).
7.
Replace the base cover (see
Replacing the Base Cover
).
8.
Slide the battery into the battery bay until it clicks into place.
Back to Contents Page
Advertising