Input select, Input select advanced – Dell M410HD Projector User Manual
Page 27
INPUT SELECT
The Input Select menu allows you to select your projector’s input source.
A
UTO
S
OURCE
—Select Off (the
default) to lock the current
input signal. If you press the
Source button when the Auto
Source mode is set to Off, you
can manually select the input
signal. Select On to auto detect
the available input signals. If
you press the Source button
when the projector is on, it
automatically finds the next
available input signal.
VGA—Press
to detect VGA signal.
S-V
IDEO
—Press
to detect S-Video signal.
C
OMPOSITE
V
IDEO
—Press
to detect Composite Video signal.
HDMI—Press
to detect HDMI signal.
A
DVANCED
—Press
to activate Input Select Advanced menu.
INPUT SELECT ADVANCED
The Input Select Advanced menu allows you to enable or disable input sources.
VGA—Use
and
to enable or disable VGA input.
S-V
IDEO
—Use
and
to enable or disable S-Video input.
C
OMPOSITE
V
IDEO
—Use
and
to enable or disable Composite Video input.
HDMI—Use
and
to enable or disable HDMI input.
NOTE:
You cannot disable your current input source. At anytime, a minimum of
two input sources have to be enabled.
Using Your Projector
27