CLIFFORD GP500 User Manual
Page 12
TO RE MOTELY
AD JUST THE
DUAL- ZONE
PIEZO SEN SOR:
With the ig ni tion turned OFF. Press but tons II
and III si mul ta ne ously for three sec onds. The
sys tem will re spond with one chirp.
To adjust the warning level of the sensor, you
must have the ignition turned ON, to adjust the
trigger level of the sensor, turn the ignition OFF.
Then:
•
Press but ton II to de crease sen si tiv ity. A sin gle
chirp con firms each de crease in sen si tiv ity.
•
Press but ton III to in crease sen si tiv ity. Two
chirps con firm each in crease in sen si tiv ity.
•
Three chirps in di cate that you are at the top or
bottom of the 16 step incremental range.
Test your settings by lightly thumping on the
motorcycle. One chirp signals an alarm trigger
level detection, two chirps signal a warning level
detection.
Press button I on the remote control to save the
new settings.
10
GP500