COBY electronic MP-C351 - Manual (Page 12)

- 1 -
USB Driver Installation
It is not necessary to install the USB driver if your computer is running Microsoft Windows
ME/2000/XP or newer, or Macintosh OS X. Computers running these operating systems will rec-
ognize your player automatically when connected.
Microsoft Windows 98 SE
It is only necessary to install the USB driver if your computer is running Windows 98 SE.
Insert the Installation CD into your computer’s CD or DVD drive. Make sure to place the
mini-CD in the center, recessed well of the drive tray.
Navigate to MY COMPUTER and double-click on the CD/DVD drive icon (usually “D:”).
Double-click on the folder “Win98 USB Drivers” and then on the folder “english”.
Double-click on the SETUP icon (SETUP.EXE) to start the USB driver installation program.
Follow the on-screen instructions to complete the installation and then restart your computer.
Note:
Mini-CDs should only be used in normal tray-loading CD/DVD drives. Mini-CDs may be used in
slot-loading drives with the proper adapter; please contact your computer or drive manufacturer
for more information.
Connecting to a Computer
To connect the player to your
computer:
Turn the player off to
place it in Standby
mode.
Open the Connections
panel. Connect the play-
er to your computer with
the supplied USB cable
as shown in the diagram.
Your computer will recog-
nize the player as a Removable Disk. If you have installed an SD/MMC card in the player,
your computer will recognize the card as a second Removable Disk.
Disconnecting from a Computer
Disconnect your player as instructed below to prevent data loss or corruption.
Microsoft Windows
Double-click the green arrow in the taskbar located on the lower-right side of the computer
screen (Safely Remove Hardware).
Select “USB Mass Storage Device” from the list that appears and then click on “Stop”.
Select “USB Mass Storage Device” from the list that appears and then click on “OK”.
1.
.
3.
4.
5.
1.
.
3.
1.
.
3.
CONNECT TO A COMPUTER