Cabletron Systems STHI - Manual (Page 49)

The Chassis Status View Screen
Page 5-14
5.6 The Chassis Status View Screen
Access the Chassis Status View screen (Figure 5-7) from the Device Status
menu.
Figure 5-7. Chassis Status View Screen with Anatomy Labels
Functions of the Chassis Status View Screen
1
Each column in the Chassis Status View screen displays current status
information about a module in the stack. Use the Chassis Status View
screen for the following functions:
• view/change the connection settings between modules throughout
the stack,
• view/change the current status of each port,
• view the ring speed setting,
• and configure each TCU port for station or Ring Out connections.
All hub devices are polled at user-defined intervals and the screen is
dynamically updated to show current settings and status readings.
5.6.1 The Screen Mode Screen Command
The Chassis Status View screen offers three different modes of operation,
each of which brings different functionality to the screen’s port and
multiplexer fields.
CHASSIS STATUS VIEW ( OPERATIONAL )
5 4 3 2 1
STH24 STH24 STH24 STH24 STHI24
|---> <---> <-B-> <---> <---|
16Mb/s 16Mb/s 16Mb/s 16Mb/s 16Mb/s
1 BYP 1 BYP 1 BYP 1 BYP 1 INS
2 INS 2 INS 2 LNK 2 BYP 2 INS
3 ENB 3 LNK 3 ENB 3 ENB 3 INS
4 INS 4 LNK 4 INS 4 LNK 4 INS
5 LNK 5 INS 5 INS 5 LNK 5 INS
6 INS 6 INS 6 ENB 6 LNK 6 ENB
7 ENB 7 ENB 7 ENB 7 ENB 7 ENB
8 ENB 8 ENB 8 ENB 8 ENB 8 ENB
9 INS 9 INS 9 ENB 9 INS 9 ENB
10 INS 10 INS 10 INS 10 INS 10 BYP
11 INS 11 INS 11 INS 11 INS 11 LNK
12 ENB 12 ENB 12 ENB 12 INS 12 ENB
NEXT [ OPERATIONAL ] [ REFRESH 3sec ] RETURN
STHI LOCAL MANAGEMENT Flash Image Version: 1.00.00
Ring Speed Line
Multiplexer Line
Port Fields