Cecilware AUTOMATIC GAS COFFEE URN FE-100G User Manual
Page 2
2
SAFETY PRECAUTIONS
FOR YOUR SAFETY, THE FOLLOWING SAFETY PRECAUTIONS SHOULD
BE FOLLOWED AND ENFORCED.
IF YOU SMELL GAS:
• OPEN WINDOWS
• DON’T TOUCH ELECTRICAL SWITCHES
• EXTINGUISH OPEN FLAMES
• IMMEDIATELY CALL YOUR GAS SUPPLIER
1. Instructions must be posted in a prominent location and all safety
precautions taken in the event the user smells gas. Obtain this
information from your local gas supplier.
2. LIGHTING: Follow the instruction on page 6 and label attached to
right side of coffee urn.
3. Do not place anything over the flue opening.
4. Do not place combustibles or non-combustible materials in the
proximity of coffee urn as this could cause fires or obstruct air flow to
the main burners.
5. This installation must conform with local codes, or in absence of local
codes with the National Fuel Gas Code ANSI Z223.1, latest edition.
6. Provide adequate air supply and ventilation.
7. Provide adequate clearance for air openings into the combustion
chamber.
8. Provide clearance for servicing and proper operation. Minimum
clearance from combustible construction 8” from back and 6” from
side.
9. Boiler must be disconnected from gas supply during any pressure
testing of pipelines in excess of ½ psig, and isolated (by turning off
gas shut-off valve) during any testing less than ½ psig.
10. Retain this manual for future reference.
UNPACKING INSTRUCTION: Carefully unpack the coffee urn and inspect
immediately for shipping damages. Your automatic coffee urn was
shipped in a carton designed to give maximum protection in normal
handling. It was thoroughly inspected before leaving the factory and the
carrier accepted and signed for it. File any claims for shipping damage or
irregularities with the carrier.
ELECTRICAL CONNECTIONS: Cord Type Plug-in
120 VAC, 15 AMP, 50/60 Hz
POWER REQUIREMENTS:
3 AMP @ 120 VAC, 50/60 Hz