Crestron electronic DM-MD8X8 - Manual (Page 74)

8x8 DigitalMedia™ Switcher Crestron DM-MD8X8
KSV Limit Test
KSV Limit Test
Perform KSV Limit Test
on this input stream?
No Yes
• Press the soft button labeled Yes to begin the test. To cancel and return to
the list of options for the input card, press the soft button labeled No.
If Yes is pressed, the DM-MD8X8 will poll the connected source to
determine the maximum number of KSVs it can support. The test results are
displayed when the test is complete.
KSV Limit Test Results
KSV Limit Test
KSV Limit Test complete.
Maximum devices
Supported: 10
OK
• Press the soft button labeled OK to return to the list of options for the input
card.
Restore Defaults Use the Restore Defaults function to reset the card to its factory settings for input
name. To restore the card’s default settings:
• Turn the selection knob to highlight Restore Defaults and press the
ENTER button.
• Press the soft button labeled Yes to restore the default setting or press the
soft button labeled No to cancel and return to the list of options for the input
card.
70
• 8x8 DigitalMedia™ Switcher: DM-MD8X8
Operations Guide – DOC. 6755A