Cabletron Systems SWPIM-BRI - Manual (Page 25)

Connecting to the Network
SWPIM-BRI Installation Guide 1-5
1.4 CONNECTING TO THE NETWORK
Figure 1-2 depicts a typical configuration for the SWPIM-BRI. The
Cabletron Systems part number for the cable is 9360005-x, where x is the
length of the cable.
Figure 1-2 Typical Configurations
1.5 COMPLETING THE INSTALLATION
After installing the SWPIM-BRI, the SWPIM-BRI will need to be
configured for the network. Refer to the host platform software
documentation in order to set up and manage the SWPIM-BRI using the
software.
SSR-600
SWPIM-BRI
S/T-interface
Site 2
WAN Cloud
NT
SSR-600
SWPIM-BRI
U-interface
Site 1
U-interface