Compaq PROLIANT ML350 - Manual (Page 32)

Removal and Replacement Procedures
2-18 Compaq ProLiant ML350 Generation 3 Server Maintenance and Service Guide
COMPAQ CONFIDENTIAL Codename: Steel Dragon 2.4 Part Number: 278704-002 Last Saved On: 12/18/02 9:43 AM
To remove the front I/O system fan module:
1. Disconnect the I/O fan cable from the system board (2). Refer to Figure 2-13.
1
2
Figure 2-15: Removing the system I/O fan module
2. Loosen the thumbscrew securing the I/O fan module to the chassis (1).
3. Carefully lift the I/O fan module out and away from the chassis (2).
To replace the I/O fan module, reverse steps 1 through 3.