Hot-plug hard drive cage, Hot-plug hard drive cage -22 – Compaq PROLIANT ML350 User Manual
Page 36
Removal and Replacement Procedures
2-22
Compaq ProLiant ML350 Generation 3 Server Maintenance and Service Guide
COMPAQ CONFIDENTIAL Codename: Steel Dragon 2.4 Part Number: 278704-002 Last Saved On: 12/18/02 9:43 AM
Hot-Plug Hard Drive Cage
To remove a hot-plug hard drive cage:
1. Complete the preparation procedures. Refer to “Preparation Procedures” earlier in this
chapter.
2. Remove the bezel door. Refer to “Bezel Door” earlier in this chapter.
3. Remove the access panel. Refer to “Access Panel” earlier in this chapter.
4. Disconnect the power cable from the back of the hot-plug hard drive cage (1).
5. Disconnect the SCSI cable from the back of the hot-plug hard drive cage and system
board (2).
1
2
2
Figure 2-19: Disconnecting cables from the hot-plug
hard drive cage