Canon VB-C60 - Manual (Page 148)

5-8
Log Message List
■ Application Messages (Uploader)
●A120 Upload destination name resolution failed [notice]
Message uploader cannot resolve the server name (A120)
Explanation Name resolution of the upload destination failed.
●A004 Uploader start and stop [info]
Message %1 uploader (A004)
%1 Start (starting) or stop (stopping)
Explanation The uploader has started or stopped.
●A137 Invalid upload setting value (e-mail notification) [notice]
Message smtp mode invalid. uploader set <none> forcibly(A137)
Explanation The setting value of e-mail notification was invalid. “none” (do not send e-mail notification) was set
forcibly.
●A138 Invalid upload setting value (e-mail notification authentication method) [notice]
Message authentication mode invalid. uploader set <smtp auth> forcibly(A138)
Explanation The setting value of the e-mail notification authentication method was invalid. “SMTP_AUTH” was
set forcibly.
●A121 Upload destination connection failed [notice]
Message uploader cannot connect the server (A121)
Explanation connect () to the upload destination failed.
●A122 Upload destination connection failed [notice]
Message uploader cannot connect the server (A122)
Explanation Connection to the upload destination failed due to a cause other than A120 and A121.
●A130 Buffer recovery of stream for recording [notice]
Message stream buffer recovered - lost=<number of the lost frames> (A130)
Explanation Image buffering for stream for recording was recovered.
●A134 Invalid upload setting value (FTP/HTTP mode) [notice]
Message ftp/http mode invalid. uploader set <none> forcibly(A134)
Explanation The setting value of the upload method was invalid. “none” (do not upload) was set forcibly.
●A135 Invalid upload setting value (PORT/PASV mode for FTP) [notice]
Message ftp port/pasv mode invalid. uploader set <pasv> forcibly(A135)
Explanation The setting value of the PORT/PASV mode for FTP upload was invalid. “PASV mode” was set
forcibly.
●A136 Invalid upload setting value (HTTP notice only/image mode) [notice]
Message http notice/image mode invalid. uploader set <image> forcibly(A136)
Explanation The setting value of notice only/image mode for HTTP upload was invalid. “Image mode” was set
forcibly.
COP
Y