Configuring stutter message waiting, Configuring auto answer (intercom) – Cisco ip phone 7960 User Manual
Page 13
3-13
Cisco SIP IP Phone Model 7940/7960 User Guide
OL-1365-01
Chapter 3 Using the Cisco IP Phone 7940/7960
Configuring Call Preferences
Step 4
Press the Scroll key to highlight Call Hold Ringback from the Call Preferences menu.
Step 5
To enable the Call Hold Ringback feature, press the Yes softkey. To disable the feature, press the No
softkey.
Step 6
Press the Save softkey to save your selection of this feature and display the Settings menu.
Step 7
Press the Back softkey to display the main LCD screen.
Configuring Stutter Message Waiting
You can configure your phone to provide a stutter dial tone when there is a message waiting when you
receive dial tone for making a call by using the Stutter Msg. Waiting feature.
Perform the following steps to configure the Stutter Msg. Waiting feature.
Step 1
Press the settings button.
Step 2
Press the Scroll key to highlight Call Preferences.
Step 3
Press the Select softkey.
Step 4
Press the Scroll key to highlight Stutter Msg. Waiting from the Call Preferences menu.
Step 5
To enable the Stutter Msg. Waiting feature, press the Yes softkey. To disable the feature, press the No
softkey.
Step 6
Press the Save softkey to save your selection of this feature and display the Settings menu.
Step 7
Press the Back softkey to display the main LCD screen.
Configuring Auto Answer (Intercom)
You can configure your phone to automatically answer an incoming call to the speaker by using the Auto
Answer (Intercom) feature.
Perform the following steps to configure the Auto Answer (Intercom) feature.
Step 1
Press the settings button.
Step 2
Press the Scroll key to highlight Call Preferences.
Step 3
Press the Select softkey.
Step 4
Press the Scroll key to highlight Auto Answer (Intercom) from the Call Preferences menu.
Step 5
Press the Scroll key to highlight the line (Line 1 or Line 2) you want to configure for auto answer.
Step 6
To enable the Auto Answer (Intercom) feature for the selected line, press the Yes softkey. To disable the
feature for the selected line, press the No softkey.
Step 7
Repeat
and
if you want to enable or disable this feature for the other line.
Step 8
Press the Save softkey to save your selection of this feature and display the Settings menu.