Scilogex SK-O180-Pro - Manual (Page 4)

2
SK-O（L）330- Pro Orbital and Linear Digital Shaker SK-O（L）180- Pro Orbital and Linear Digital Shaker
1.Safety Instructions
Warning!
• Read the operating instructions completely
before use and follow the safety instructions.
• Ensure that only trained staff work with the
instrument.
Protective ground contact！
• Make sure the socket must be earthed
(protective ground contact) before use.
• Wear the personal protective equipment in accordance
with the hazard category of the media to be processed.
- Splashing of liquids.
- vibration force led to broken glass container.
- The body，hair，clothes，jewelry are inhaled.
• Use the instrument following the safety instructions and
profession safety rules to avoid any accident.
• Users are not allowed to touch moving parts of the
instrument to avoid any accidents. Pay attention to protect
hands or fingers from rolling when moving the instrument.
• Set up the instrument in a spacious area on an stable,
clean, non-slip, dry and fireproof surface. Do not operate
the instrument in explosive atmospheres, with hazardous
substances or under water.
• Observe the vessel on the shaking table for medium
splashing out of liquid when setting the motor speed. Reduce
the motor speed if the instrument is not running smoothly.
• Accessories must be securely attached to the instrument
so that it cannot come off by itselves, and vessels must be
firmly placed on the shaking table to avoid any injury.
• Working with combustible media or flammable materials
may result in additional hazards. Only process media that
will not react dangerously to the extra energy produced
through processing should be used on the instrument.
• Safe operation is only guaranteed with the accessories
described in the “Accessories” chapter and by following
the operating instructions in full. Always disconnect the
plug before fitting accessories. Check the instrument and
accessories beforehand for damage each time you use them.
Do not use damaged components.
• The instrument may only be opened by trained technicians.
And always disconnect the plug beforehand.
• The operating voltage required as stated on the instrument
and voltage in the supply network must match.
• Do not cover the instrument. Protect the instrument and
accessories from bumps and impacts.
• Keep away from high magnetic field.