Tomei Powered TECHNICAL TRAX/ ADVANCE LSD - Manual (Page 19)

CHANGING THE INITIAL TORQUE
The Technical Trax Advance design utilizes the internal plates. So it's possible to increase
the initial torque. (excluding certain models).
AXA / IA
[PLATE LOCATION FOR REBUILDS]
[EXAMPLE: INCREASING INITIAL TORQUE]
↓
16.5-18.5
③ SPRING DISC (INNER TEETH) - 2
④ FRICTION DISC (OUTER TEETH)
STOCK INITIAL TORQUE→
NO. OF PLATES i.e. Increased Torque (kg・m)
① SPRING DISC (TOOTHLESS) 2
SPRING DISC (OUTER TEETH)
-
LOCATION TYPE NO. OF DISCS
18.0-20.0 8 8
② - 2
INCREASED INITIAL TORQUE
① ④ ⑤ ④ ⑤ ④ ⑤ ④ ⑤ ⑤ ④⑤ ④ ⑤④ ⑤ ④ ①
② ③ ④ ④⑤④⑤④⑤
⑤ ④ ⑤ ④ ⑤ ④ ④ ③ ②
19
EA / EXA / CXA
[PLATE LOCATION FOR REBUILDS]
[EXAMPLE: INCREASING INITIAL TORQUE]
↓
SPACER 1 -
FRICTION DISC (OUTER TEETH)
STOCK INITIAL TORQUE→
NO. OF PLATES i.e. Increased Torque (kg・m)
NO. OF DISCS
18.0-20.0 ⑤
16.5-18.5
④ SPRING DISC (INNER TEETH) -
10
③ SPRING DISC (OUTER TEETH) - 2
10
10
LOCATION TYPE
①
SPRING DISC (TOOTHLESS) 2 -
⑤ FRICTION DISC (INNER TEETH) 8 6
2
INCREASED INITIAL TORQUE
②
⑥ FRICTION DISC (INNER TEETH) 8
① ⑤ ⑥⑤ ⑥ ⑤⑥ ⑤ ⑥ ⑥ ⑤⑥⑤⑥⑤⑥⑤ ② ⑤⑥ ⑥ ⑤ ②
③ ④ ⑤⑤⑥⑤⑥⑤⑥ ⑥ ⑤ ⑥ ⑤ ⑥⑤ ⑤ ④③ ⑤ ⑥ ⑥ ⑤
19