Helmet mount – Trail Tech SCMR16 HID LIGHTS FOR 1 1/8 IN. BAR CLAMP: POLARIS OUTLAW 471-PLF User Manual

Page 21

Advertising
background image

21

Continued ...

HELMET MOUNT

CONNECT HELMET LIGHTS

TO VEHICLE POWER:

Included in all helmet light kits.
STEP 1: Connect to battery.
Trail Tech helmet lights can
be run off of the vehicle
lead-acid battery. Attach the
battery cable connector shown
below to the to the vehicle
battery. Remember that there
is a polarity requirement: the
red wire goes to the positive
terminal, and the black wire
goes to the negative terminal.
Use a 10-20 amp in-line fuse.

STEP 2: Mount connector
to bars.
Run the cable under
the seat and gas tank to the
handlebars. Zip-tie connector
to bars for easy access.

Battery Cable Connector

Step 2

Step 1

Advertising
This manual is related to the following products: