Trail Tech SCMR16 HID LIGHTS FOR 1 1/8 IN. BAR CLAMP: POLARIS OUTLAW 471-PLF - Manual (Page 5)

5
PRECAUTIONS
• HIGH VOLTAGE! Disconnect
from power before service or
maintenance, including lamp
replacement. Extremely high
voltage shock danger.
• Trail Tech lights are only
servicable by qualifi ed
technicians.
• Use Trail Tech battery or
vehicle power with Trail Tech
helmet lights. Use of third-party
Li-Ion or NiMH batteries will
void warranty.
• Use a fuse. Trail Tech lights
should use a 10-20 amp fuse
as close to the battery as
possible on the (+)positive
terminal side.
• Pay attention to the trail.
When using Trail Tech
Lighting products, follow
basic precautions:
• The lights will become warm
during operation. Allow 5-10
mph air fl ow for proper cooling.
• Do not wash lights with high
pressure water / pressure
washer.
• Avoid contact with gasoline,
degreasers or other chemical
cleaners.
• Altering a Trail Tech lighting
product in any way will void
warranty.
• Respect the environment.
WARNING: