Compaq SW3322 - Manual (Page 61)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-23
Compaq SW3322/SW3323/SW3324 Dual-Speed Switch User Guide
Writer: Fran Spragens Project: User Interface Comments:
File Name:3324_3.doc Last Saved On:3/16/99 3:05 PM
Port Configuration Menu
The Port Configuration Menu allows you to configure port settings for a
specific port. Select c from the Port Menu, enter a port number, and press
Enter to view the Port Configuration Menu. Figure 3-18 shows the Port
Configuration Menu and Table 3-17 describes the menu.
Figure 3-18 Port Configuration Menu
Table 3-17
Port Configuration Menu Descriptions
Selection Description
Port Name Allows you to assign an administrative name to the port (1-14 character range).
Port Enable Allows you to enable (Yes) or disable (No) the port.
Flow Control Enable Allows you to enable (Yes) or disable (No) flow control on the port.
Auto-negotiation
Enable
Allows you to enable (Yes) or disable (No) the auto-negotiation mode for the port.
If Auto-negotiation Enable is set to No, the Full Duplex and Port Speed fields display
and are eligible for configuration.
If Auto-negotiation Enable is set to Yes, the Full Duplex and Port Speed fields
disappear and the system automatically manages these functions.
Full Duplex Allows you to enable (Yes) or disable (No) the full duplex mode for the port.
Port Speed Allows you to set the speed (10 or 100Mbps) for the port.
PORT 1 CONFIGURATION Access Control:READ/WRITE
a. Port Name
b. Port Enable Yes
c. Flow Control Enable No
d. Auto-negotiation Enable No
e. Full Duplex Yes
f. Port Speed 100
x. Previous Menu
Enter Selection: