Compaq SW3322 - Manual (Page 97)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
&7TERRMRK8VII'SRGITXW
;VMXIV *VER7TVEKIRW4VSNIGX 7TERRMRK8VII'SRGITXW'SQQIRXW 
*MPI2EQI CF HSG0EWX7EZIH3R     %1
7TERRMRK8VII4VSXSGSPMRE2IX[SVO
Figure B-1 illustrates the use of three SW3322 switches to establish an effective
Spanning Tree configuration. Figure B-2 illustrates the same principal using
three SW3323 switches. Switches A, B and C are connected together in a
redundant topology (more than one path between two points). If the connection
between A and B goes down, the link between A and C becomes active, thereby
establishing a path between A and B through switch C. Additionally, if the
connection between B and C goes down, the link between A and C becomes
active, establishing a path between B and C through switch A.
*MKYVI&7TERRMRK8VII'SRJMKYVEXMSR9WMRK7;7[MXGLIW