Sony CPD-L181 - Manual (Page 20)

1
Additional Information
Specifications
LCD panel
input signal format
Pixel efficiency
Resolution
Power requirements
Power consumption
Dimensions (w/h/d)
Mass
Plug & Play
Supplied accessories
Panel type; a-Si TFT Active Matrix
Picture size: 18.1 inches (46 cm)
RGB operating frequency*
fh: 30 - 92 kHz
fv: 48 - 85 Hz
99.99 %
H: max. 1280 dots
V; max. 1024 lines
AC 100 - 240 V, 50 - 60 Hz,
1.0-0.6 A
Max. 48 W
Including the stand:
Approx. 468
X
422 x 207.5 mm
(18 V 2 x l 6 V s x 8 > / 4 in.)
Monitor only;
Approx. 468
X
354.5 x 90 mm
(18 7 2 x 1 4 x 3 Vs in.)
Approx. 9 kg (19 lb 14 oz)
including the stand
DEX:/DDC2B/DDC2Bi
See page 6.
* Recommended horizontal and vertical timing
conditions
Horizontal sync width duty should be .more than 4.8% of total
horizontal time or 0.8 visec., whichever is larger.
Horizontal blanking width should be more than 2.5 )jsec.
Vertical blanking width should be more than 450 psec.
Design and specifications are subject to change without
notice.
-SD1/-S2 pin assignment
®@(|)(2)©
® ( D ® @ ©
Pin No. Signal Pin No. Signal
1 Red 8 Blue Ground
2 Green
(Composite Sync
on Green) 9 DDC + 5V*
10 Ground
11 ID (Ground)
3 Blue
12 Bi-Directional
Data (SDA)*
4 ID (Ground)
5 DDC Ground* 13 H.Sync
6 Red Ground 14 V. Sync
7 Green Ground 15 Data Clock (SCL)*
Display Data Channel (DDC) Standard of VESA
20