Viewing pictures in an automatic cycle – Sony DSC-D700 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
<
<5‘
5
(Q
3
Turn the power/mode dial to OFF to turn off the
power.
If the camera is on but not operated for about
three minutes, power to the LCD monitor shuts
off (Standby Mode). Also, if the camera is not
operated for approximately another two minutes,
the camera shuts off completely. In Standby
Mode you can return to the playback condition by
touching any button, dial or switch on the camera.
When the camera has shut itself completely off,
you can return to the playback condition by
pressing the release button.
Viewing Pictures in an Automatic Cycle
Pictures are automatically played back frame by frame.
1
While pressing the mode lock (green), rotate the
power/mode dial to PLAY.
The access lamp lights as the camera reads the
last picture taken.
Reading is finished when the access lamp goes
out. The picture is played back.
Press the MENU button.
The menu is displayed on the LCD monitor.
Select “Auto Play” using the A(UP)/V(DOWN)
buttons and then press EXECUTE.
The Auto Play menu is displayed.
40
GB