Sony XR-C500 - Manual (Page 9)

Displaying the station name
Press ( DSPL ) during radio reception.
F n I
E U R H I 5 5
Each time you press ( dspl ), the item
changes as follows;
Station name* —► Frequency -► Clock
c:
* If the station name is not stored, "NO NAME"
appears in the display for one second.
Erasing the station name
1
Tune in any station and press
(
list
)
for
two seconds.
2
Press
( DSPL ) for two seconds.
3
Press CD or CD to select the name that
you want to erase.
4
Press CD (ENTER) for two seconds.
The name is erased.
Repeat steps 3 and 4 if you want to erase
other names.
5
Press ( LIST ) for two seconds.
The unit returns to the normal radio
reception mode.
Locating a station by
паше — List-up
1
Press ( LIST ) momentarily.
The name assigned to the station currently
playing appears in the display.
L S T
E U R H I S S
2
Press ( LIST ) repeatedly until you find the
desired station.
3
Press (D (ENTER) to tune in the desired
station.
Note
Once the station name or frequency has been displayed for
five seconds, the display goes back to its normal mode.
To turn off the display, press (DSPL).
Òliier tìnctions '
Using the rotary remote
The rotary remote works by pressing buttons
and/or rotating controls.
You can control the optional CD or MD
changer with the rotary remote.
By pressing the button
(the SOURCE button)
( SOURCE )
Each time you press ( source ), the
source changes as follows:
FM1 -► FM2 —► AM CD1 —» CD2 —► MD1
MD2
Tip
When the POWER SELECT switch is set to position
O,
you can turn on this unit by pressing ( SOURCE ) on the
rotary remote.
By rotating the control
(the SEEK/AMS control)
Rotate the control momentarily and
release it to:
• Locate a specific track on a tape or a disc.
Rotate and hold the control to locate the
specific point in a track, then release it to
start playback.
•Tune in the stations automatically. Rotate
and hold the control to tune in the specific
station.
Щ
7 3
Q i
Q.
Я
О
гг
ф
"П
с
а
о
9