Adjustments adjusting the picture size, Adjusting the picture rotation, Adjusting the pincushion – Sony CPD-200ES User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjustments
Adjusting the Picture Size
The adjustment data becomes the individual setting for each
input signal received.
1
Press the SIZE button.
The "SIZE" OSD appears.
SIZE
SIZE
o
E 32
®' 0
68
0
2
For vertical adjustment
Press the D!
\/\
buttons.
:
q
- +
o
o
■f ... to enlarge
4’ ... to diminish
For horizontal adjustment
Press the 3
buttons.
- O +
■^ ... to diminish
“► . .. to enlarge
To erase the "SIZE" OSD, press the SIZE button again.
The "SIZE" OSD automatically disappears 10 seconds after
you release the buttons.
To reset, press the RESET button while the OSD is on.
Adjusting the Picture Rotation
The adjustment data becomes the common setting for all
input signals.
1
Press the GEOM button.
The "GEOMETRY" OSD appears.
GEOMETRY
o
[*]
32
[t]
2
Press the O b u t t o n s .
♦ . . to rotate clockwise
■^ ... to rotate counterclockwise
-
-a +
o
o
To erase the "GEOMETRY" OSD, press the GEOM button
again.
The "GEOMETRY" OSD automatically disappears 10
seconds after you release the buttons.
To reset, press the RESET button while the OSD is on.
Adjusting the Pincushion
The adjustment data becomes the individual setting for each
input signal received.
1
Press the GEOM button.
The "GEOMETRY" OSD appears.
GEOMETRY
Q
e 68 H
2
Press the 3
buttons.
- 9 +
to diminish the picture sides
o
... to expand the picture sides
To erase the "GEOMETRY" OSD, press the GEOM button
again.
The "GEOMETRY" OSD automatically disappears 10
seconds after you release the buttons.
To reset, press the RESET button while the OSD is on.