Precautions, Examples of plug types, Getting started – Sony CPD-220GS User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Getting Started
Precautions
Prevent internal heat build-up by allowing adequate air
circulation. Do not place the monitor on surfaces (rugs,
blairkets, etc.) or near materials (curtains, draperies) that
may block the ventilation holes.
Do not install the monitor near heat sources such as
radiators or air ducts, or in a place subject to direct
sunlight, excessive dust, mechanical vibration or shock.
Do not place the monitor near equipment which generates
magnetism, such as a transformer or high voltage power
lines.
Clean the cabinet, panel and controls with a soft cloth
lightly moistened with a mild detergent solution. Do not
use any type of abrasive pad, scouring powder or solvent,
such as alcohol or benzine.
Do not rub, touch, or tap the surface of the screen with
sharp or abrasive items such as a ballpoint pen or
screwdriver. This type of contact may result in a scratched
picture tube.
Use an appropriate power cord for your local power
supply.
For the customers in the U.S.A.
If you do not use the appropriate cord, this monitor will
not conform to mandatory FCC standards.
Examples of plug types:
for 100 to 120 VAC
for 200 to 240 V AC
• Before disconnecting the power cord, wait at least 30
seconds after turning off the power to allow the stahc
electricity on the CRT display surface to discharge.
• After the power has been turned on, the CRT is
demagnetized (degaussed) for about 5 seconds. This
generates a strong magnetic field around the metal frame,
which may affect the data stored on magnetic tapes and
disks near the bezel. Place magnetic recording equipment,
tapes and disks away from this moiutor.
The outlet should be installed near the equipment
and be easily accessible.
When you transport this monitor for repair or shipment, use
the original carton and packing materials.
With the tilt-swivel, this monitor can be adjusted to the
desired angle within 180° horizontally cind 20° vertically.
To turn the monitor vertically and horizontally, hold it at
the bottom with both hands as illustrated below.