Speaker placement, Note, Speaker set up – Sony DVP-C600D User Manual

Page 42: Specifying the speaker type, Front speaker, center speaker, or rear speaker, Sub woofer, Notes, Speaker setup, Dolby digital surround

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Dolby Digital Surround

Speaker Placement

For the best possible surround sound, we recommend

the following conditions.

• Use higher performance speakers.

• Use rear and center speakers that match your front

speakers in size and performance.

• All speakers should be the same distance from the

listening position.

• Place the subwoofer between the front (L, R)

speakers if possible.

Note

Do not place the center or rear speakers farther away from the

listening position than the front speakers.

Speaker Set Up

To obtain the best possible surround sound, first

specify the type of speakers you have connected and

their distance from your listening position. Then use

the test tone to adjust the speaker volumes to the same

level.

ENTER

Specifying the speaker type

1

Press SET UP and select -|," then press ENTER.

2

Select the speaker you want to adjust in

"SPEAKER SETUP" and press ENTER.

3

Select the appropriate symbol for the speaker, then

press ENTER.

■ Front speaker, Center speaker, or Rear speaker

Generally, if you are utilizing large, full-range

(large)

speakers that effectively reproduce bass

frequencies, select this symbol. This is default

setting.

A If you are utilizing small speakers with rninimal

(small)

bass response, select this symbol.

&

If you will not connect the speaker, select this

symbol. You carmot select this symbol for the

front speakers.

The above speaker selections will activate the Dolby

EHgital bass redirection circuitry and output the bass

frequencies to the appropriate speakers.

■Sub woofer

1^ If you connect a sub woofer, select this symbol

to output the LEE (low frequency effects)

channel from the sub woofer. This is default

setting.

;J( i If you do not connect a sub woofer, select this

symbol. This activates the Dolby Digital (AC-3)

bass redirection circuitry and outputs the LEE

signals from other speakers.

Notes

• The cut off frequency for the subwoofer is fixed at lOOHz.

• Set the subwoofer's cut off frequency as high as possible.

• Depending on the settings of other speakers, the subwoofer

may output excessive sound.

• The bass management options provided by the bass

redirection circuitry in this player will optimize system set­

up based on total system configuration selected. In some
instances, independent speaker selections might be changed

to reflect the most optimum multi-channel sound

experience.

• If your speakers are too small to reproduce low bass

frequencies, please set all speaker setting to " A" (small)

and utilize a subwoofer for low frequency sound.

42

5 . 1 O U T P U T S E T U P 1

S P E A K E R S E T U P

D I S T A N C E

0 0 0 0 * i g

Q U I T

Symbol

Note

When you select a symbol, the sound cuts off for a moment.

Advertising