Necessary setup before using the player, To connect the player to a wide-screen tv, To connect the player to a normal tv – Sony DVP-C600D User Manual
Page 9: Selecting the language for on-screen display, To cancel using the setup display on the way, Note, Getting started
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Getting Started
Necessary Setup Before Using
the Player
Some setups are necessary for the player depending^on
the TV or other components to be connected.
For details on using the setup display, see page 36.
For details on each setup display item, see pages 37 to
39.
For details to enjoy Dolby Digital Surround, see pages
40 to 45.
■To connect the player to a wide-screen TV
In the setup display, set "TV TYPE" in "INITIAL SETUP
1" to "16:9."
■To connect the player to a normal TV
In the setup display, set "TV TYPE" in "INITIAL SETUP
1" to "4:3 LETTER BOX" (default setting) or "4:3 PAN
SCAN." For details, see page 38.
■To listen to the sound through speakers connected to
an amplifier with a digital connector or to output the
sound to a digital component such as a DAT or MD deck
When you play a DVD, set "DIGITAL OUT" in "INITIAL
SETUP 2" to "PCM" or "D-PCM" in the setup display.
"PCM" is default setting. For details, see page 39.
■To enjoy Dolby Digital surround sound by connecting
the player to an amplifier with 5.1 ch inputs
In the setup display, set "MODE" in "5.1 OUTPUT
SETUP 2" to "OFF." This is default setting. See page 40
to hookup the speaker system and page 42 to set each
speaker position or distance etc.
■To connect the player to an audio component with a
built-in Dolby Digital decoder
In the setup display, set "DIGITAL OUT" in "INITIAL
SETUP 2" to "DOLBY DIGITAL/PCM."
Use the setup display to change the various settings for
the picture and sound.
For details, see page 36.
To enjoy surround sound with front speakers only,
set "MODE" in "5.1 OUTPUT SETUP 2" to "VES
A" or "VES B." You can enjoy surround sound
through both the LINE OUT (AUDIO 1, 2) and
FRONT (L/R) of the 5.1CH OUTPUT connectors.
See page 44 for details.
Selecting the Language for
On-screen Display
You can select the language for the setup display or the
messages displayed on the screen. Default setting is
"ENGLISH."
ENTER
1
Press SET UP and select
then press ENTER.
using
and
L A N G U A G E S E T U P
O S D ;
¿ ^ E N G L I S H
2
Select "OSD" using
\
1
^ ,
then press
or ENTER.
3
Select the language you want using then
press ENTER.
C H O I X D E L A L A N G U E
^CRANS^. '
To cancel using the setup display on the way
Press SET UP.
Note
The languages you can select are the ones displayed in step 2.
For details, see page 37.