Sony RM-V22 - Manual (Page 3)

Remote Button Descriptions
Operating a Cable box
Operating a TV [U To light up the Commander's
buttons, (The light will
automatically turn off if no
button is pressed for more than
10 seconds.)
[3 To mute the volume on the TV.
Press again to turn muting off.
[8] Set to TV (AVI or AV2 on
which the TV is assigned).
[9l To set up the Commander.
03 To operate SLEEP function on
the TV. (Works only for a TV
with the SLEEP fimction.)
O To change the channel. For
example, to change to chaimel
5, press 5 and ENTER.
ÏÏË Channel up: +
Channel down: -
O To operate JUMP,
FLASHBACK or CHANNEL
RETURN function on the TV
depending on the setting of the
TV's manufacturer.
1_ To turn on and off.
2^ To change the input mode,
5] To change the channel. For
example, to change to channel
5, press 0 and 5 (or , press 5
and ENTER.)
S] To display the current channel
on TV.
[5] Volume up: +
Volume down: -
To turn on and off,
2 To set up the Commander
3] To change the channel. For
example, to change to channel
5, press 0 and 5 (or, press 5 and
ENTER.)
3] To light up the Commander's
buttons. (The light will
automatically turn off if no
button is pressed for more than
10 seconds.)
3] Set to AVI or AV2 on which thé
cable box is assigned.
Î6l To change the channel. For
example, to change to charmel
5, press 5 and ENTER.
f7l Charmel up; +
Channel down: -
[8] To operate JUMP,
FLASHBACK or CHANNEL
RETURN function on the TV
depending on the setting of the
TV's manufacturer.
Notes
• There may be cases you may turn
on/ off the cable box by pressing the
CH+ or CH- buttons on the
Commander.
• If your cable box can control
volume, be sure to set its volume
control to a medium position. If the
volume on the cable box i.s turned
down completely, you will not be.
able to adjust your TV's volume
with the Commander.
Operating a VCR
a
o
To turn on and off.
To change the input mode.
To change the channel. For
example, to change to charmel
5, press 0 and 5 (or, press 5
and ENTER.)
To display the on-screen menu
(Sony VCR only).
To record, press ► while
pressing •.
First release ►, then release #.
To pause
To rewind
To play
To stop
To light up the Commander's
buttons. (The light will
automatically turn off if no
button is pressed for more than
10 seconds.)
Set to VCR (AVI or AV2 on
which the VCR is assigned)
To set up the Commander.
To change the channel. For
example, to change to channel
5 , press 5 and ENTER.
To fast-forward
Charmel up; +
Charmel down: -