B.2.2 default community strings, B.2.2 – Cabletron Systems 6500 User Manual
Page 128
B-8 SmartSwitch 6500 User Guide
Managing the SmartSwitch 6500
Agent Support
•
TrapCommunity: Specifies the NMS to which traps are sent
•
MyNMAddr: Specifies the IP address through which the switch is managed
•
TrustedNMS:Specifies the IP address of the NMS allowed to perform the following commands:
-
update firmware
-
backup
-
restore
-
reboot
B.2.2
Default Community Strings
The following is a list of the default community strings used by the SmartSwitch 6500:
•
public — Used for all standard SNMP communication
•
ILMI — Used by ILMI channels between switches
•
zeitnet — Used by the SmartSwitch ATM Administrator program
Caution
If the community string zeitnet is changed on the SmartSwitch 6500 it must also
be changed at the SmartSwitch ATM Administrator. Failure to do so, makes the
SmartSwitch 6500 unreachable by the SmartSwitch ATM Administrator
program.