Setting the code, Step 1: entering th« code number – Sony RM-V10A User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CABLE
Setting the Code
Step 1: Entering th« Code Number
1 Power off
component you want
to set up. Then set the slide switdi
on the iwmote Commander to VCR
(to set up a VCR), CABLE (to set up
a cable box), or TV (to set up a TV).
2
Turn to "Compment Code Numbers* on page 12, and find
the two-character code number for your component.
If mc»re than one code number is listed, use the number
that's listed Rist to complete the steps dut follow.
For example, if you're
setting up a №uip's VCR,
you wotud use code
munberOS.
If yoiu- component is not listed, see "Seaidiing for the
Correct Code* on page 8.
3
Press and release the S (SET) button.
OD
4
Enter die cmnponent's code number.
FPr example, if you're entering the
code for a flip's VCR, you would
press and release 0, then press and
releases.
© ®
yeurCed»Nimib«r
5
Press and release dte ENTER button
to store dte code number in the
Commander's memory.
6 Go to "Stm 2: Checking if the Code Number Works*
page 7 to iWdi setting up.
on
I setting up