Canon imageCLASS MF6500 Series - Manual (Page 5)

7
Connect Power Cord and Turn On the Machine
1 2
Connect the power cord into the rear socket and the wall
outlet and press the [I] side of the main power switch to ON. The machine enters standby mode.
What if...
● <CLOSE COVER LEFT COVER> is displayed:
Make sure that the left cover is closed properly.
(See “Install Toner Cartridge,” on p. 3.)
● <TONER IS NOT SET INSTALL TONER> is displayed:
Make sure that the toner cartridge is installed properly.
(See “Install Toner Cartridge,” on p. 3.)
Main power switch
1 0 0 % L T R
T E X T
A
1 0 0 % A U T O
T E X T
A
0 1
0 1
Without optional cassette
With optional cassette
Set the Date and Time
● Entering Information
– Numeric keys: Enter letters and
numbers.
– [ ] and [ ]: Move the
cursor position.
– [Clear]: Deletes the character at
the cursor position, or the entire
entry if held for more than one
second.
1
Press [Additional
Functions].
2
Use [ ] or [ ] to
select <6. TIMER
SETTINGS>, then press
[OK].
3
Confirm that
<1. DATE&TIME
SETTING> is displayed,
then press [OK].
4
Use the numeric keys to
enter the date (month/day/
year) and time (in 24-hour
format), then press [OK].
5
Press [Stop] to return to
standby mode.
Paper
Select
COPY FAX SCAN
Image Quality Density Enlarge/Reduce
OK
Two-Sided
System
Monitor View Settings
Reset Collate GHI
@./
PQRS
Tone
JKL
ABC
TUV
MNO
DEF Clear ON/OFF
Stop
Start
Processing/ Data Error Power
WXYZ
SYMBOLS
Additional
Functions 2 on 1
Frame Erase
1
4
7
2
5
8
0 #
3 C
6
9
[OK]
[Stop] Numeric Keys [ ] [ ]
[Additional Functions]
[Clear]
Ex.
D A T E & T I M E S E T T I N G
1 2 / 3 1 / ´ 0 6 1 1 : 1 9
8