Connecting other equipment – Sony KV-13TR28 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting Other Equipment
Connecting video equipment to a stereo TV with an S video input jack (KV-20TS32 only)
Preparing for use
1
Turn on the TV.
2
Press the TV/VIDEO button on the TV or on the Remote
Commander so that “VIDEO” appears on the screen.
When you cannot obtain a clear picture and/or sound
Make sure that the TV/VTR on the VCR is set to TV.
Reselect the channel you want to view w№ the controls on
the TV or the Remote Commander.
About S video input
Video input and output signals can be separated into Y
(luminance or brightness) and C (chroma or color) signals.
Usually these two signals are combined in a VCR and sent
as one signal to a TV. Separation of the Y and C signals
prevents them from interfering with one another, thereby
improving picture (especially color) quality.
This TV is equipp^ with an S video input jack through
which these separated signals can be input directly. This
way you can connect your S video-equipped VCR
separately from a non-S video VCR.
To return to TV mode
Press the TV/VIDEO button on the TV or Remote Commander so
that a channel number appears on the screen.
For operating instructions, refer to the instruction manual
furnished with the VCR.
If the picture or sound is affected, move the VCR away
from the TV.
If S VIDEO Is set to OFF, you cannot watch VCR
playback pictures from the S VIDEO Input.
To set S VIDEO to ON, see “Watching a Video with Your
S Video-Equipped VCR," p. 27.
24
Chapter 1 : Setting Up