Sony SLV-420 - Manual (Page 13)

1 Set the RF UNIT switch to CH 3 or CH 4^ whichever
channel is not used in your area. If both are used^ set
the switch to either channel.
If you made A/V connections (from page
1), you can
skip this step.
Hookup 3: VCR setup
2
SetNORM/CATVtoCATV:
Press MENU and select
TUNER PRESET.
Set NORM/CATV to CATV
and press EXECUTE.
mCR SCT/CWECK
»■ TIMER PRESET
SET VCR Pm*. CHANNELS
CABLE BOX COKTTXX
CLOCK SET
TUNER PRESET CHS
» noruk : atv
AUTO PRESET
NORM • CATV
MANUAL SET • ADO ERASE
AFT
FINE TUNMO
• ON OFF
For details, see page 20.
Preset the channels into the VCR:
Press MENU and select
TUNER PRESET.
Select AUTO PRESET
and press EXECUTE.
MENU TUNER PRESET CM3
TIMER SETCMECK NOflMCATV NORM «CATV
► tuner preset ► AUTO PRESET
SET VCR PXn . CHANNELS MANUAL SET •ADD ERASE
CABLE BOX CONTROL • AFT • ON OFF
CLOCK SET FINE TUNOJG
—- please war ——
_______ F X ______
For details, see page 20.
1 Find the VCR Plus+ Ch
2
innel Listing in your program
guide. For details on the VCR Plus+ Channel listing,
see page 26.
2
If the channels in the program guide are different
from the channels that you actually use on your TV,
set the channels that are different as follows:
Hookup 3: VCR Plu&t- channel setup
Press MENU and
SET VCR Plus+ CHANNELS. Enter the program guide
channel, then the channel
you use on your TV.
MENU
1»<EH STTiCMECK
tuner preset
»SET VCR Pm*. CHANNELS
CABLE BOX CONTROL
CLOCK SET
SET VCR Hu». CMA»MELS
— GUIDE CH TV CH-----------
PUSH KEYS TO SET
PROGRAM GLnOE CM
OR. PUSH EXECUTE TO SEE
VCR Pin*,
channel LtST
For details, see page 27.
Program guide channel
Your actual TV channel •
4
Press EXECUTE.
You are now ready to use your VCR
A Quick reference (back cover) to operations is
provided on the back cover to help you quickly enjoy
the basic functions. These procedures differ slightly
depending on the hookup used. Make a note of which
hookup you used (Hookup 3) so that you can always
follow the correct instructions.
Getting Started | t3