Playing back tapes – Sony GV-M20 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Playing Back Tapes
Make Sure №at trie power source is attached to this ut
1 Attach the DC pack to the video recorder/monttor by aligning the upper side edge of the DC
pack with the white line on the video recorder/monitor and elide the DC pack in the direction .
of the ^ mark while preeeing It.
2 Plug the power cord into the cigarette lighter socket.
Notes
• Be careful not to let any metal object touch the metal projection on the battery pack. When the battery
pack IS not in use, keep <t in its case.
• Keep the video recorder/monitor away from any power source. Such sources may cause noise to appea
on the screen.
Cautions on using this unit in a car
• For your safety, do riot watch video tapes or operate the controls while driving.
• Avoid leaving the unit in a place with very high temperatures. If you do. it may cause distortion of the
cabinet or malfunction of the unit.
• If you use this unit while the car engine is stopped, the car battery will be discharged. Avoid runnir>g
this unit from the car battery more than 12 hours without recharging it.
• Remove the car bailery cord from the cigarette lighter socket if you do not use the unit for a long
1 Press OPEN A and open the display.
. 2 Press EJECT*.
The cassette holder opens automatically
Do not open the cassette holder forcibly.
3
Insert a cassette with the window side fecirvg up.
4
Press the PUSH mark.
The cassette holder closes automatically.
When you press EJECT *. power Is supplied and the cassette holder opens even if me power <s turned
off. After the cassette holder opens, the power goes oft automaticaHy. Press POWER if you want to
continue the operation.