Sony KV-9PT60 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
1 Attach the stopper to the slider.
2 While holding down the lever, pull the slider in the direction of the
arrow.
3
Attach the TV temporarily to the slider so that two claws of the
bracket base fit in the square-holes located inside of the TV's knob.
4 While holding down the lever, push the slider in the direction of the
arrow so that the claws of the stopper fit in the ventilation hole of
the TV' cabinet.
Make sure that the bracket and the TV are locked completely.
SEN
Setting up
Advertising
This manual is related to the following products: