Notes, To stop recording, press, Recording with digital input – Sony MZ-R30 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Recording with digital
input

1 b«> iinil hns

Л

I'uill in '•nmplnv^

\ \ \ { c

conviTU'r Si' ihjl \4'ii i.m liW'id

pi4'\;i*in)s |1Ч'П\

i4jinpmont usini;

i'llu

‘ 1

sampUn«; rati'-', a> a US tunm

i'l a РЛТ iUvk

CO MO playee

Portable CD

digital amplifier, etc.

player, etc.

Optical f
plug 0

POC-15B etc.
(not supplied)

-РОС-1 SAB etc.

(not supplied)

♦ Optical

mini­
plug

Insert a recordable MD and start
recording.
To record, see "Recording an MD right
awav !" (page 6). To record from a
portable CD player, set the CD player to
pause and then start recording.

LiNE IN (OPTICAL) jack is for both
digital and analog input

The recorder automatically recognizes the
line cable and switches to digital or analog
input.

Notes

•You can make a digital recording only from

an optical type output

•Some portable CD players with the ESP*

system cannot send out digital signals
when it is activated. In this case, release the

ESP system.
* Electronic Shock Protection

To start/stop recording with
the player

(Synchro-recording)

N on can easilv niako digital recording'' ot
a digital st'urce o[\ an MD.
Uelore s\ nchro-it'ct'iding, make
*.t'uni'ctu'ns to the' digital st'iiiw' w ill\ a
digital cabU’ an<l the ['ouer M'lirce .md
insert a rect'jdable MD.

Slide S^■^¡C^ IRC) Ki:C It' ON,

"5^'NC" appears in thedisplas .

<

Ш

5’

c

s

0)

Ф

n

о
Q_

5*

^ Slide REC to the right while pressing

its button.
The recorder stands by for recording.

Play the source plaver. The recorder

starts recording when it recei\'es the
playing sound.

To stop recording, press

■.

When there is no sound from the plaver
more than 3 seconds during synchro-

recording, the recorder stands by for
recording automatically. When the sound
comes from the player again, the recorder

starts synchro-recording again.

Notes

• Do not switch SYNCHRO REC after step 2.

Recording may not be made properly.

•If you record in monaural, do steps 1 and 2

in "Recording in monaural for double the
normal recording time of an MD" (page 12)
before doing the synchro-recording steps.

11

Advertising