1 turn on the fm tuner of the car audio, 3 press the ( power ) on the display, Stopping cd/md playback – Sony CDX-T68PKG User Manual
Page 6: Listening to the radio or a tape, Changing the display item, Playing a cd or md, I 3 1.3 e
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Playing a CD or MD
1
Turn on the FM tuner of the car audio.
You can label CD and CD TEXT discs with a
personalized name using the disc memo
function, refer to "Labeling a CD" (page 9).
However, if you use personalized labels, ¿\ey
will always take priority over the original CD
TEXT information when such information is
displayed.
Note
1/the name of the MD or CD TEXT disc is too long, you
can scroll it across the display by pressing (SCROLL~).
2
Adjust the selected frequency by the
wireless remote.
(88.3 MHz, 88.5 MHz, 88.7 MHz, 88.9 MHz,
89.1 MHz, 89.3 MHz, 89.5 MHz, 89.7 MHz
or 89.9 MHz)
3
Press the
(
power
)
on the display.
CD/MD playback start.
Stopping CD/MD playback
С Л
I 3
1.3 E
If the power is already turned on, CD / MD
playback starts automatically when you press
CMD/CD).
Notes
• When you use a CD changer, “CD" appears in the
display. If you use an MD changer, "MD" appears in
the display.
• If the POWER SELECT switch on the hideaway unit is
set to the OFF position and the display on the display
unit is turned off, you will not be able to start CD/MD
playback with the wireless remote. In this case, press
(POWER) on the display unit.
Press either
(
power
)
on the display or
C
of
D on the wireless remote.
Notes
• When CD/MD playback is stopped, you may hear some
noise from the speakers. To prevent this from happening,
turn the wlume down before stopping CD/MD playback.
• If you turn off the ignition switch of your car without
stopping CD/MD playback, it will automatically resume
CD/MD playback from where it was stopped the next
time you turn on the ignition switch.
Listening to the radio or a tape
Be sure to stop CD/MD playback before you
start listening to the radio or a tape.
Note
Be sure to stop CD/MD playback, otherwise there may be
some interference with radio reception.
4
Adjust the volume with the volume
control on the car audio.
All the tracks play from the beginning.
Changing the display item
Each time you press (
dspdclock
set
) during
CD/MD playback, the item changes as
follows;
▼
Elapsed playback time
I
Disc name*
I
Track name*
Clock
* If you have not labeled the disc, "******" or “NO
NAME" appears in the display.
If you play an MD or CD TEXT disc, the track
name appears in the display.