Char-Broil 10201595 - Manual (Page 12)

10
Page 12
9
• Attach shelf support to side of smoker chamber with
one #10-24 X 1/2” machine screw where screw is going
through inside of chamber through hole of support and
secured with one #10-24 flange nut.
• Lay side shelf on top of other end of shelf support so
that it fits inside holding bracket.
• Secure side shelf to smoker chamber using two #10-24
X 1/2”screws and two #10-24 flanged nuts.
Fully tighten all screws and nuts.
Shelf
Support
Screw
Smoker
Chamber
Holding
Bracket
Nut
Screw
through inside
Smoker Chamber
Smoker
Chamber
Lid
Smoker
Chamber
Nut
• Place a fire grate into the bottom of the
firebox. Remaining fire grates may be
placed in the bottom of the smoker
chamber, if desired.
• The height of the grate can be adjusted
by turning it 90 degrees.
Fire Grate
Firebox
Smoker
Chamber