Hookup 4, Vcr plus+ channel setup, Program guide channel cable box output channel – Sony SLV-790HF User Manual
Page 21: Automatic clock setting, Note
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Hookup 4:
VCR Plus+ channel setup
1
2
Find the VCR P)us+ Channel Listing in your program guide. For
details, see page 45.
Enter all the channels you want to record and the cable box output
channel (usually 2, 3, or 4). For details, see page 46.
O
Press MENU and select SET VCR Plus+
CHANNELS.
TIMER SET/CHECK
TUNER PRESET
CLOCK SET
LANGUAGE
SET VCR Plus* CHANNELS
CABLE BOX CONTROL
ADVA^ED OPTIONS
Use
1 o select an______________
ilem, then push EXECUTE;
© Enter the program guide channel, then the cable
box output channel.
© Press EXECUTE.
— GUIDE CH_ TV CH------------------------
[33^'
-"rZ'3j
Push
9!
keys
to
set
Program GUIDE CH
Or,
push
fi^UTE]
to
see
VCR Plust CHANNEL LIST
Program guide channel
Cable box output channel —
Automatic clock setting
To use the Auto Clock Set feature with this hookup, you need to manually
select a channel that carries a time signal:
1
Tune the cable box to a channel that carries a time signal.
2
Select AUTO in the CLOCK SET menu to turn on the Auto Clock Set
feature.
3
Turn off the VCR. It automatically sets the clock and adjusts for
Daylight Saving Time by picking up the time signal.
If you want to use the timer to record right away, or if the channels in your
area do not carry time signals, set the clock manually. For details, see pages
34-35.
Note
To use the automatic clock setting feature, leave the cable box on.
Getting Started 21