Sony Bravia KDL- 32ML 13fi - Manual (Page 16)

3. Connecting the TV
Cable system and/or VHF/UHF
Cable or VHF/UHF (or VHF only)
Rear of TV
^VHF/UHF/
B CABLE input
75-ohm coaxial cable
(not supplied)
• It is strongly recommended that you connect the
aiitenna/cable input using a 75-ohm coaxial cable (not
supplied) to receive optimum picture quality. A
300-ohni twin lead cable can be easily affected by radio
frequency interference, resulting in signal degradation.
Cable and VHF/UHF (or VHF only)
[f you want to watch both cable and antenna (over-
the-air) programming, you will need to use an
optional A-B RF Switch (not supplied) to switch
between the cable and over-the air antenna
programming, as shown.
A-B RF
Switch
Cable
m
Rear of TV
VHF/UHF/CABLE input']
[ i
Antenna
]CX:
' Be sure to set Cable setting to Cable On or Cable
Off in Channel menu for the type of input signal you
choose (see page 30 for more details.).
HD Cable Box/HD Satellite Box
You can also enjoy high definition programming by
subscribing to high definition cable service or high
definition satellite service. For the best possible
picture, connect these components to your TV via the
HDMI or component video (with audio) input on the
back of your TV.
Shown with HDMI Connection
Rear of TV
HD satellite box
16