Cisco 7925G - Manual (Page 8)

8-8
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Chapter 8 Viewing Security, Device, Model, Status, and Call Statistics Information on the Phone
Viewing the Phone Status Menu
Related Topics
• Viewing Security Information, page 8-1
• Viewing Device Information, page 8-4
• Viewing the Phone Status Menu, page 8-8
Viewing the Phone Status Menu
The Status menu includes the following options, which provide information about the phone and its
operation:
• Status Messages—Displays the Status Messages screen, which shows a log of important system
messages. For more information, see the
“Viewing the Status Messages” section on page 8-9 .
• Network Statistics—Displays the Network Statistics screen, which shows Ethernet traffic statistics.
For more information, see the
Viewing Network Statistics, page 8-12 .
• Call Statistics—Displays the Call Statistics screen, which shows counters, statistics, and voice
quality metrics. For more information, see the
Viewing Call Statistics, page 8-14 .
• Firmware Versions—Displays the Firmware Versions screen, which shows information about the
firmware running on the phone. For more information, see the
Viewing Firmware Versions,
page 8-16 .
• Neighbor List—Displays the the neighboring APs and information on currently connected APs. See
Using the Neighbor List Utility, page 2-23 .
• Site Survey—Displays the wireless media across all channels and locates APs that belong to the
Basic Service Set (BSS). See
Using the Site Survey Utility, page 2-24 .
• Trace Settings—Displays the debug information for the phone. The following must be enabled in:
– Remote syslog
– Trace levels
WLAN Regulatory Domain Identifier for the wireless regulatory domain in which this phone
must operate.
• 1050—North America
• 3051—Europe (ETSI)
• 4157—Japan
• 5252—World mode including Australia/New Zealand, Asia,
and Pacific
USB Vendor ID Unique code that identifies the vendor as a Cisco Systems.
USB Product ID Unique code that identifies the phone as a Cisco Systems product.
RNDIS Device Address Manufacturer-assigned unique MAC address for the USB Remote
Network Driver Interface Specification (RNDIS) for the phone.
RNDIS Host Address Manufacturer-assigned unique MAC address for the USB RNDIS
for the host.
Table 8-3 Model Information Screen Items (continued)
Item Description