Sony KV-32V26 - Manual (Page 26)

Adjusting your SET UP (menus) (continued)
Using the SET UP menu
SET UP
►CHANNEL SET UP
CHANNEL BLOCK
FAVORITE CHANNEL
VIDEO LABEL
LANGUAGE: ENGLISH
TILT CORRECTION: 0
DMENU
Use ESI CS Exit ®
For detailed information on using the remote
to modify menu settings, refer to "Learning
menu selection" on page 18.
To select the SET UP @ menu:
Display Highlight Select
MENU
CD
If any menu items are "grayed out", press the
ANT button on your remote so that a channel
number appears.
Favorite channel feature is not available for
the AUX input.
22
CHANNEL
SETUP
Basic set up options
tor viewing
CHANNEL SET UP
► CABLE; OFF
CHANNEL FIX: OFF
AUTO PROGRAM
CHANNEL ERASE/ADD
CHANNEL CAPTION
OMENU
Use SO) S] Exit ®
With the CHANNEL SET UP window open:
1 Use ♦ or ♦ to select the feature you want to change.
2 Press
GD to access the feature.
CABLE: Select ON if your TV is connected to a cable system.
(AUTO SET UP will set CABLE to ON automatically when it
programs the TV)
CHANNEL RX: Use this feature to set the TV's input to one of the following options:
2-6: Choose when the cable box is connected to the VHF/UHF input and you do not want
to switch to AUX mode. Once this setting is made you will not be able to use the “TV
function” CH+/- to change channels; instead, use the “Cable function” CH +/-.
AUX 2-6: Choose when a cable box is connected to AUX and a cable or antenna is
connected to ANT. You can alternate between the two inputs by pressing ANT on the
remote control. {KV-27S36, 27V36, 29V36C, 29V76M, 32S36,32V36,34V36C, 35S36,
35V36,35V76, 37V36M only)
VIDE01: Choose when you have connected video equipment (e.g. AV receiver) and you
want TV input fixed to it. You will only be able to switch between video sources.
TIMER and CHANNEL BLOCK settings are erased when CHANNEL FIX is set.
AUTO PROGRAM: Instructs the TV to automatically program all receivable channels.
CHANNEL ERASE/ADD: With the CHANNEL ERASE/ADD window open:
Place the cursor next to ERASE or ADD.
Select the desired channel using CH+/-, or by selecting with
the 0-9 buttons and pressing ENTER.
Press GD to activate.
With the CHANNEL CAPTION window open:
Press GD and then ♦ or ♦ on the select buttons to select
the desired channel, and press GD again.
2 Press ♦ or ♦ on the select buttons to display the first letter or
number of the caption and press GD to select it. (Repeat
until all four digits are selected)
3 Press GD to activate. To erase a Caption, press RESET.
CHANNEL ERASE/ADD
»ERASE
ADD
DM6NU
CHANNEL CAPTION:
1 CHANNEL CAPTION