Locating a specific track or a point in a track, Note, Playing cds – Sony CDP-CX210 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Locating a Specific Track or a
Point in a Track
You can quickly locate any track while playing a disc
using the ll«/>{>{l (AMS: Automatic Music Sensor)
buttons or number buttons on the remote. You can also
locate a specific point in a track while playing a disc.
Playing CDs
To locate
Press
the next or
succeeding tracks
»il repeatedly until you find the
track
the current or
preceding tracks
0« repeatedly until you find the
track
a specific track
directly
1
TRACK, the number button of the
track, and then ENTER. When you
locate a track with a number over 10,
press the lO's digit first, then the Vs
digit.
a point in a track
while monitoring the
sound X
►► (forward) or ◄◄ (backward) and
hold down until you find the point
a point in a track
quickly by observing
the display [X
►► (forward) or ◄◄ (backward) and
hold down until you find the point
during pause. You will not hear the
sound during the op>eration.
!«/>{>!
TRACK
Number
buttons
Note
If "
” appears in the display, the disc has reached the end
while you were pressing Press MM or KW to go back.
.ENTER
11