Note, Labeling discs of the second cd player, Fading in or out (cdp-cx240 only) – Sony CDP-CX240 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Playing CDs
3
Push the JOG dial.
This player starts loading. (Loading takes about
one minute.)
Note
If each Disc Memo of the second CD player has more than 13
characters, the first 13 characters of each are loaded to this
player.
Labeling discs of the second CD player
You can label discs of the second CD player or change
the Disc Memos loaded from the second CD player.
1
Press MEGA CONTROL.
The MEGA CONTROL button lights up.
2
Turn the JOG dial to select the disc you want to
assign a Disc Memo to.
If the disc slot you select does not have any disc,
"NO DISC" appears in the display and you cannot
assign a Disc Memo.
3
Press INPUT.
"DISC MEMO" appears.
4
Push the JOG dial.
5
Input the new Disc Memo following the procedure
in "Labeling Discs" on pages 23 to 25.
Fading In or Out (CDP-CX240
only)
You can manually fade the sound in or out to prevent
tracks from starting or ending abruptly.
Note that you cannot use this effect when you use the
DIGITAL OUT (OPTICAL) connector.
FADER
To
Press FADER
Start play fading in
During pause. “FADE" appears in
the display and the -»*1 indication
flashes. The play fades in.
End play fading out
When you want to start fading out.
"FADE" appears in the display and
the I*»" indication flashes. The play
fades out and the player pauses.
Note
Fading lasts for about 5 seconds.
Note
The new Disc Memos are stored on this player's memory, so
you cannot display them on the second CD player.
21