Sony KP 61S70 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3
Press \’C^1 LMI -- to continue
- VOLUME +
To perform AUTO SET UP again
D
4
Press CHANNEL + to preset channels
nutomaticallv.
- CHANNEL +
"Auto Program" appears and the
projection TV starts scanning and
presetting channels automatically. While
scanning, the received channel will be
displayed on the sub screen. When all the
receivable channels are stored, the lowest
numbered channel is displayed.
RjiSH RXXts TVA'IDEO
o o o o o
a D
SET UP MENU -<(y
a
J
l
;
--------------------------------------------------------------------
J
Press SET UP inside the drop-down panel on
the projection TV and perform steps 2-4
abox'e.
Press SET UP again to exit.
Adjusting the Convergence
Automatically (FLASH FOCUS)
The projection tube image appears on the
screen in three layers (red, green and blue). If
they do not converge, the color is poor and
the picture blurs.
Before you use your projection TV, be sure to
adjust the convergence.
The FLASH FOCUS feature allows you to
adjust the convergence automatically.
Tips
'ij''
•
It is recommended to perform FLASH FOCUS about
30
minutes after the projection TV is first turned on.
• You can also perform FLASH FOCUS using the Set
Up menu on page
33
.
The cross pattern appears and FLASH
FOCUS begins to work. The adjustment is
completed when the cross pattern becomes
white.
Note:
• FLASH FOCUS is canceled if you
perform any other function while FLASH
FOCUS is working.
15