Sony KP 61S70 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Channel
Skip/Add
SA'ps
iinrrc
Auto Program
Automatic
channel presetting
Cable
Cable system
setting
After AUTO SET UP, you can erase unnecessary
channels from the channel preset memory.
With the Channel Skip/Add window open:
1
Press
♦
or ♦ to select the desired channel. You can
view the channel that is selected with the Channel
Skip/Add menu in the sub screen. You can also use
CH +/- or 0-9 and ENTER buttons.
2 Press/
3
Press ♦ or ♦ to select
Skip,
and press G \
The selected channel will be erased.
If you want to re-enter the skipped channel, follow the steps above and select
Add.
Select
Yes
to signal the projection TV to automatically program all receivable
channels. When all the receivable channels are stored, the lowest numbered
channel is displayed.
Select
No
to cancel Auto Program.
Select
On
if your projection TV is connected to a cable system.
Select
Off
if your projection TV is connected to an antenna.
27