Sony KV-20VM40 - Manual (Page 31)

4 Press SELECT, then set the hour of the recording start time to "8" with + 0
or -0.
If you try to do an incorrect
operation
The Video/TV displays a message
on the screen and interrupts the
operation.
When the ON timer overiaps a
timer program
• If the start time of the ON timer is
the same or earlier than that of a
timer recording program, the ON
timer activates and the timer
recording does not operate.
• If the start time of the ON timer is
later than that of a timer recording
program, the TV screen turns on at
the ON timer start time, and the
recording continues.
TIMER SET/CHECK 10/ 5 MON
DATE START STOP CH
ro 6H*
_ / _ _
Move(S(S SelectSDES) Exited
5 Press SELECT, then set the minute of the recording start time to "15" with
+ O or - O.
TIMER SET/CHECK 10/5 MON
DATE START STOP CH
«y 6nS8:15FU
___
___________
_ ____
_
_ / _ _
MoveSKS SelectSBD Exliffia
6 Press SELECT, then set the hour of the recording stop time to "9" with + O
or - 0.
TIMER SET/CHECK 10/5 MON
DATE START STOP CH
W 6TUEfi
_
- / _ -
_
_ / __
MoveflX!] SelectSSD Exitffpxa
7 Press SELECT, then set the minute of the recording stop time to "55" with
+ O or - O.
TIMER SET/CHECK 10/ 5 MON
DATE START STOP CH
1<y 6TUE8 1 5PM 9 55PM________
—------------ _
/ -
-------
—------------
MoveQlS SeiectSBD ExitŒi
8 Press SELECT, then set the chaimel to "26" with + or - 0.
TIMER SET/CHECK 10/ 5 MON
DATE START STOP CH
W 6TUE8;15PII 9:55PM 26 _
_ / _ _ __
_ / ___________
_ / _____
_ / _____ ____ _____
____
Move(B 9 SelectOED ExHgPP
9 Press SELECT, then set the recording speed to EP with + 0 or - 0.
TIMER SET/CHECK 10/5 MON
DATE START STOP CH
W 6HEe:15PH 8;55PH 26 &
_ / _
-/„
Move(QSI SelectSBD ExitQBD
Basic Operations I 31