Sony CPD-420GS - Manual (Page 5)

Identifying parts and controls
See the pages in parentheses for further details.
Front Rear
Q] Front Video Input connector (HD15) (page 6)
Pull open this connector to connect a laptop or second
computer. This connector inputs RGB video signals and sync
signals from your computer.
(D0(3)(D®
®(9)(8)@(g)
Pin No. Signal
1 Red
2 Green
(Composite Syne on Green)
3 Blue
4 ID (Ground)
5 Ground
6. Red Ground
7 Green Ground
8 Blue Ground
9 Not used
10 Ground
11 ID (Ground)
12 Bi-Directional Data (SDA)*
13 H. Sync
14 V. Sync
15 Data Clock (SCL)*
DDC (Display Data Channel) is a standard of VESA.
H RESET (reset) button (page 9)
This button resets the adjustments to the factory settings.
d] INPUT (input) button (page 8)
This button selects the Front or Rear Video Input signal. The
input signal and corresponding on-screen messages change
each time you press this button.
[3 GPE (graphic picture enhancement) button (page 8)
This button selects the Graphic Picture Enhancement (GPE)
Mode.
m ASC (auto sizing and centering) button (page 8)
This button automatically adjusts the size and centering of the
picture.
[U MENU button (page 9)
This button displays the MENU OSD.
[Zl 3 (contrast)
( W '* ’ )
buttons (page 10)
These buttons adjust the contrast and function as the (W4')
buttons when adjusting other items.
d] (brightness)
{ * /* )
buttons (page 10)
These buttons adjust the picture brighmess and function as the
(e/e) buttons when adjusting other items.
[S (!) (power) switch and indicator (page 7)
This button turns the monitor on or off. The indicator lights up
in green when the monitor is turned on, and either flashes in
green and orange, or lights up in orange when the monitor is
in power saving mode.
S3 AC IN connector (page 6)
This connector provides AC power to the monitor.
BI] Rear Video Input connector (HD15) (page 6)
This connector inputs RGB video signals and sync signals
from your computer.
©(D(3)0(D
© @ ® @ ®
Refer to [T] for pin assignment.