Sony CAV-1 - Manual (Page 23)

Operations
Starting Program Sources
and Other Electrical
Equipment Automatically
and Sequentially — Macro
Setting
A macro is a command that activates and
operates a series of electrical devices in
sequential order. Use the procedure below to
create up to five macros, each of which can
perform up to ten operations.
1
Select Macro from the Setup menu.
The Macro Setting menu appears.
2
Click on one of the number buttons (1 to
5) to select the macro.
3
Click on one of the icons under Selection:
to register it as one of the devices to be
operated by the macro.
To find other icons, click on either the
A
or ▼ button to the right of the screen.'
The operation panel of the selected
device appears.
4
Click on the operation button that you
want to register.
The button is registered in the Macro,
and the numbered space below lights up
purple.
To specify a time lag between the
execution of one operation and the
execution of the next
Click in "sec" box, then enter the time in
seconds on the keyboard.
5
Repeat steps 3 and 4 to register other
items.
To delete a registered operation button or
delay time
Click on the item you want to delete, then on
Delete.
To delete a macro
Click on ALL Clear. All macros are deleted.
To name a macro
Click on the blank area to the right side of
Macro List: , then enter the name of the macro
on the keyboard.
To execute a macro
Click on the number of the macro to be executed in
the Main Control Panel. To check the contents of a
macro, move the pointer to the macro number.
23