Notes, Format indicator, Standby/rec indicator – Sony DCR-TRV103 User Manual
Page 17: Time code/tape counter, Remaining tape indicator, Remaining battery time indicator, To extend the recording time in the 5sec mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
Recording a picture
Recording starts when you press START/STOP, and stops when you press it again
(factory setting).
ANTI GROUND SHOOTING X. '■ The camcorder records only while you press START/
STOP. Use this mode to avoid recording unnecessary
scenes.
5SEC: When you press use this mode to START/STOP, your camcorder records for 5
seconds and then stops automatically.
/—
s
START/STOP
M ODE
u
■
a.
I
■
A
■ 5
SEC
ANTI GROUND SHOOTING
N ...
/
Notes
• You cannot use the fader function in the 5SEC or mode.
^The time code does not appear in the 5SEC mode.
The indicators are not recorded on tape.
lafOminll l)T
Format indicator
STANDBY/REC indicator
■ Time code/Tape counter
1^5|~g
Remaining tape indicator
This appears after you irrsert a casette for a while.
Remaining battery time indicator
Time code (for tapes recorded in the DigitalS Ef system only)
The time code indicates the recording or playback time, "0:00:00" (hours:minutes:
seconds) in CAMERA mode and "0:00:00:00" (hours:minutes:seconds:frames) in VTR
mode. You cannot rewrite only the time code. Your camcorder uses the drop frame
mode.
When you play back tapes recorded in the Hi8/standard 8 system, the tape counter
appears.
To extend the recording time in the 5SEC mode
Five dots (•••••) appear, and then disappear at a rate of one per second. To extend
the recording time, press START/STOP again before all the dots disappear. Recording
continues for about 5 seconds from the moment you press START/STOP.
17