Inserting a scene – Sony DCR-TRV103 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Inserting a scene
You can insert a scene in the middle of a recorded tape by setting the start and end
points. The previously recorded frames between these start and end points will be
erased. Use the Remote Commander for this operation.
[b]
---
1
^
(
1
)
While your camcorder is in the standby mode, keep pressing EDITSEARCH,
and release the button at the insert end point
[b].
(2) Press ZERO SET MEMORY. The ZERO SET MEMORY indicator flashes and
the counter resets to zero.
(3) Keep pressing the - @ side of EDITSEARCH and release the button at the
insert start point
[a].
(4) Press START/STOP to start recording. The scene is inserted. Recording stops
automatically at the counter zero point. Your camcorder returns to the standby
mode.
EDITSEARCH
* •
Notes
• The zero set memory function works only for tapes recorded in the DigitaS E) system.
• The picture and the soimd may be distorted at the end of the inserted section when it
is played back.
If you re-record on the section which contains a non-recorded section
The zero set memory function may not work correctly.
When START/STOP MODE is set to A or 5SEC
You cannot use the zero set memory function.
40